What's Included

• Pair of 6.5" speaker mounts
• 8 M4 cap screws for speaker mounting
• 2 Adhesive backed foam sheets

Installation Instructions

1. Remove and disassemble OEM speaker mounts and carefully remove all speaker wiring with connectors.

2. Lay out two adhesive backed sheets onto a flat surface and cut them to fit the bottom of the mount. X-Acto knife works great for this.

3. Clean rear deck area with wax remover and apply adhesive backed sheets to their speaker mounting positions.

4. Mount your Speakers via M4 cap screws to the speaker mounts and route wiring through appropriate provisions in the mounts.

5. Install speaker mounts to the vehicle via OEM screws and connect speaker connectors.

6. Test speaker operation before interior reassembly and enjoy!