What's Included

• Pair of speaker mounts
• Pair of protective lids to protect tweeter
  capacitors
• 8 M4 cap screws for speaker mounting
• 8 M3 screws for mounting tweeter connectors,
  capacitor boards, and lids
• 2 Adhesive backed foam sheets

Installation Instructions

1. Remove interior door panels and OEM speaker
enclosures from the vehicle.

2. Disassemble OEM speaker enclosures and carefully
remove all speaker wiring with connectors and tweeter capacitors.

3. Lay out two adhesive backed sheets onto a flat
surface and cut them to fit the back ring of the mount. X-Acto knife works
great for this. Do not attach cut out sections to the mount just yet.

4. Mount tweeter capacitors and tweeter
connectors (Orange) to their designated spots via M3 screws. Route all wiring
through designated holes to the back of the mount.  

5. Mount protective lids over the capacitors and secure with M3 screws.

6. Mount your Speakers via M4 cap screws to the two
halves of the speaker mount.

7. Connect wiring on the back side of the mount to
the speakers.

8. Peel adhesive backing from adhesive sheets and
attach to the back around the speaker mounts.

9. Install speaker mounts to the vehicle via OEM
screws, connect speaker connectors, and attach top white connector to the
mounts.

10. Test speaker operation before door panel
assembly and enjoy!